Mightex Systems developed and produced BLS-SA/PL series BioLED control modules features proprietary “IntelliPulsing” technology to allow BLS-series sources to output significantly higher power in pulse mode than what the LEDs are rated for in CW mode.
The control module features a linear LED driver design that eliminates light intensity ripples and oscillations often observed when low-cost buckpuck nonlinear drivers are used. Clean and highly repeatable pulses are critical to quantitative experiments. Both CW mode and pulse modes are supported. Time resolution of the control module is 20us and light intensity can be adjusted with 0.1% increments. Each driving channel on the control module has its own TTL trigger input. Rising edge, falling edge, and follower mode are supported in the trigger mode.
The led controller module can be operated without being connected to a computer. Once pulse sequences are programmed and stored into the control module (by user through software), the light source can operate alone without a computer. All it needs is a TTL trigger signal to output the user-programmed pulse sequences.
Mightex BioLED light source solutions come with a Windows-based operation software featuring an intuitive yet powerful graphic user interface. A software development kit (SDK) is also provided for user integration into environment such as Labview and Matlab.
The BLS-PL04-US Bio LED Controller Module offers 4-channels, with additional synchronization features to work with Polygon400 Dynamic Spatial Illuminators.
Contact us for more information about led controller and BLS-PL04-US BioLED Control Module.
Please visit the Mightex Systems website to find more information about the BLS-PL04-US Bio LED Controller Module.