info@mci-neuroscience.com | Tel: +44 (0) 1825 890 858
Mightex BLS-series BioLED light sources or microscope LED are modularized fully-customizable turn-key solutions for fluorescence excitation.

Collimated Microscope LED for Fluorescence Excitation – Enhanced Intensity and Control by Mightex System

Mightex BLS-series BioLED light sources or microscope LED are modularized fully-customizable turn-key solutions for fluorescence excitation.

Why Are These The Best Microscopy Light Sources?

Several unique innovations make the BioLED range of light sources the best systems currently available for researchers who are interested in high intensity, stability, flexibility and value for money:

Optimised Intensity Levels

Mightex BLS-series collimated microscope LED light sources employ the latest high-power LED technologies and optimised coupling optics to achieve maximum optical output power.

In conjunction with these optimised aspects, the proprietary “IntelliPulsing” technology implemented in the BioLED control modules enable the LEDs to output approximately double the amount of light compared to what is available in continuous wave (CW) mode.

Superb Stability

The BioLED control module features a linear microscope LED driver design that eliminates light intensity ripples and oscillations often observed when low-cost nonlinear drivers are used.

Flexible Control

Clean and highly repeatable pulses are critical to quantitative experiments. Both CW mode and pulse modes are supported. Time resolution of the control module is 20us and light intensity can be adjusted with 0.1% increments. Each driving channel on the control module has its own TTL trigger input. Rising edge, falling edge, and follower mode are supported in the trigger mode.

The control module can be operated without being connected to a computer. Once pulse sequences are programmed and stored into the control module (by the user through supplied software), the light source can operate alone without a computer. All it needs is a TTL trigger signal to output the user-programmed pulse sequences.

Mightex BioLED light source solutions come with a Windows-based operation software featuring an intuitive yet powerful graphic user interface. A software development kit (SDK) is also provided for user integration into environment such as Labview and Matlab.

Microscope Led Controller Options

The following controllers are currently available (See accessories section below to see more information or to add to quote basket)

  • BLS-PL02-US – BioLED Light Source Control Module, 2-channel, with additional synchronization features to work with Polygon400 Dynamic Spatial Illuminators.
  • BLS-PL04-US – BioLED Light Source Control Module, 4-channel, with additional synchronization features to work with Polygon400 Dynamic Spatial Illuminators.
  • BLS-SA02-US – BioLED Light Source Control Module, 2-channel
  • BLS-SA04-US – BioLED Light Source Control Module, 4-channel

Contact our team of experts to know more about microscope lighting systems and the best microscope led for your laboratory needs.

Accessories